PRESSING INSTRUCTIONS

DTF Pressing Instructions:

1. Use a lint roller to clean the shirt.
2. Pre-press the shirt for 5–7 seconds to remove moisture.
3. Place the design on the shirt.
4. Press using the settings below.
5. Peeling:
   • Hot Peel Film: Peel after 5–10 seconds. Do not let it cool.
   • Cold Peel Film: Let it cool completely before peeling.
6. Post-press for 5 seconds.

Tip: Use a Teflon sheet on top for best results.

DTF Press Settings

Use medium to high pressure. Temps may vary by equipment and environment.

Cotton & 50/50 Blends

Temp.150-160C

Temp. Compensation: 15C

Heatpress Time: 10-15sec

Polyester & Synthetic fabrics. Temp.130-140C

Temp. Compensation: 15C

Heatpress Time: 10-15sec

Your heat press should be at medium to firm pressure. Recommended pressure: 4-5bar (58-72PSI)

DTF PEELING:

Hot Peel: (our printed films are hot peel)

Peel 5–10 seconds after pressing. Cold Peel: Peel when cool to the touch.

DTF Care Instructions

Storage:

• Keep transfers dry (Ziploc bags work best).
• Add silica gel packets to the Ziploc.

NOTE: Moisture will ruin your DTF transfer

Garment Washing:

• Wash warm
• Tumble dry on delicate
• Do not iron design directly (iron inside-out if needed).

Contact Us

Quotes: quotes@dtfzone.com

Customer Service: cs@dtfzone.com